What should I pay attention to when customizing stainless steel outdoor cabinets?

Here is a direct, professional, and wordless notice for customization of stainless steel outdoor cabinets, which is suitable for purchasing, technology, bidding and scheme.

Key points for attention in customization of stainless steel outdoor cabinet

I. Material and thickness (core)

Material selection

Outdoor priority: 304 stainless steel (corrosion resistance, rust prevention, high cost performance)

Coastal/high salt fog/heavy pollution: 316 stainless steel must be used.

201/202 (easy to rust) is strictly prohibited.

Plate thickness

Box: ≥1.2mm

Door panel: ≥1.5mm

Load-bearing/large cabinet: 1.5~2.0mm is recommended.

Second, the protection level (outdoor)

Standards: IP54, IP55, IP65 (conventional outdoor IP55 is enough)

Must do:

Rain-proof, dust-proof and splash-proof

Door frame with high quality sealing strip (EPDM rubber)

Make a sloping roof/slope roof at the top to prevent water accumulation.

Third, the structure and technology

Welding: full welding+grinding and polishing, without virtual welding or missing welding.

Splicing: bend as one as possible to reduce joint leakage.

Door lock: stainless steel anti-theft lock/three-point lock.

Hinge: Thick stainless steel hinge, bearing and durable.

Fourth, heat dissipation and ventilation

Natural heat dissipation: louver+dustproof net

Forced cooling: optional fan, cooling hole and heat exchanger.

It must be rain-proof, and the louvers are inclined downwards.

V. Internal configuration (customized according to requirements)

Mounting plate: galvanized/stainless steel mounting plate

Guide rail, grounding post, trunking, and wiring ring.

Laminate, power socket, lightning protection module, temperature control

Internal grounding should be reliable and independent.

VI. Dimensions and Installation

Reserve cooling space+wiring space according to equipment size.

Wall hanging/landing/pole holding/inlaying shall be confirmed in advance.

Floor cabinets should be equipped with bases, feet and mounting holes.

Seven, surface treatment

Wire drawing/mirror surface/matte can be used.

Outdoor wire drawing is recommended, which is resistant to fingerprints and scratches.

Laser lettering, LOGO and numbering can be done as required.

Eight, environmental adaptability

High temperature, low temperature, sunlight, rain, salt spray and dust should all be considered.

Coastal/Chemical Zone: Anti-corrosion must be strengthened

Nine, acceptance points

Appearance without deformation, rust, seamless water leakage.

Door lock and hinge switch are smooth.

Reliable grounding

The measured protection level is qualified.

Dimensions, openings and interfaces are consistent with the drawings.

X. Other details

Inlet and outlet holes are equipped with waterproof connectors and glen head.

Can be added: anti-theft, rain eaves, rings, casters.

Clear warranty period (usually 1~3 years)